Phoenix Local

Irrigation System Installation and Repair

Licensed, STC Certified installers serving Chandler, Gilbert, Mesa, and the entire Phoenix Valley.

Call now(623) 263-2652

Call (623) 263-2652 Request an estimate

Free estimate

Tell us what you need

Three fields. It reaches a person here, not a call centre.

Irrigation Design Built for Desert Yards

Updated October 2026

A properly designed irrigation system delivers water where your plants actually need it, on a schedule that fits the desert climate, without waste. That's the whole job. InfinityTurf Landscaping LLC is an STC Certified Installer with over 10 years running irrigation design and repair across the Phoenix Valley, and every system we put in the ground is built around the specific soil, grade, and plant load of your yard. If your current system is flooding one bed and starving another, that's a design problem, not a watering problem. Call us and we'll sort it out.

Irrigation work ranges from a straightforward valve repair to a full zone-by-zone redesign around new artificial turf, paver patios, or desert landscaping. What drives cost is scope: number of zones, whether existing lines can be salvaged, the depth of any caliche layer we hit during trenching, controller type, and whether a backflow preventer needs to be added to meet code. A simple repair on an accessible valve line is a short visit. A full redesign with smart controller integration and drip conversion is a multi-day install. Either way, every job is different. Contact InfinityTurf Landscaping LLC for an accurate estimate.

What We Install and Repair

From a cracked head to a full system rebuild, we handle both sides of irrigation work.

New System Installation

Full design and install for yards with no existing irrigation. We map zones around plant types, sun exposure, and soil conditions before a single trench is cut.

Zone Repair and Expansion

Adding a planting bed, turf area, or paver section means your existing zones may need rerouting. We extend or reconfigure without disturbing what already works.

Drip Conversion

Spray heads waste water in the desert heat. Drip conversion delivers directly to the root zone, cuts runoff, and keeps your yard HOA-compliant under current water restrictions.

Smart Controller Upgrades

Older timers run fixed schedules whether it rained last night or not. Smart controllers adjust automatically based on weather data and cut water use without you touching a setting.

Valve and Backflow Repair

A stuck valve or failed backflow preventer is more than an inconvenience. We diagnose and replace on the same visit in most cases, with parts stocked for common Arizona system configurations.

Leak Detection and Line Repair

Wet spots, dead patches, and a spiking water bill are the three signs of a subsurface leak. We locate the break, excavate, repair, and test before we leave the job.

Our Process

How an Irrigation Install Works

Three stages, no surprises between them.

01
Design and Zone Mapping
We walk the yard, document plant types, sun exposure, and any paver or turf areas already installed, then design a zone layout that matches each area's actual water demand.
02
Trenching and Installation
Lines go in at proper depth for Arizona freeze risk, heads and emitters are positioned for full coverage with minimal overlap, and the controller is wired and programmed before we backfill.
03
Testing and Calibration
Every zone runs while we watch it. We adjust head angle, flow rate, and run times until coverage is even, there's no puddling, and the schedule fits current watering restrictions.

Desert-Specific

Arizona Irrigation Is a Different Problem

new system installation work, professional service in Phoenix, AZ

Caliche is the reason generic irrigation advice doesn't work here. That hard calcium carbonate layer sitting a foot or two below the surface in most Phoenix Valley yards doesn't drain, which means water pools above it, roots suffocate, and heads that look fine on paper flood the surface instead of soaking in. We've been digging through caliche for over a decade. We know where it sits in Chandler, where it's shallow in Gilbert, and how to route lines around it in Mesa subdivisions without ripping up a patio to do it. Flood irrigation is also still common in older parts of the Valley. If your property has flood rights and you're trying to blend that with drip or spray zones around new desert landscaping, that's a design challenge most irrigation companies skip past. We don't. The yard you end up with has to work with whatever water source is coming in, and that's part of the design conversation from the start.

When to Call Instead of Wait

01
Your Water Bill Jumped Without Explanation
A subsurface line break in a zone that runs at 2 AM can drain thousands of gallons before you notice the grass is wet. The longer it runs, the deeper the erosion goes under your walkway or driveway paving.
02
You See Dead Zones Next to Soggy Ones
Uneven coverage means heads are clogged, misaligned, or a valve is failing. Drought stress on desert plants during July and August isn't just cosmetic. Most species don't recover after two missed cycles at 115 degrees.
03
You're Starting a New Landscape Project
Adding turf, pavers, or a planting bed after the irrigation is already in the ground is the most expensive way to do it. Design the irrigation around the finished yard, not the other way around.

What You Get With InfinityTurf

Licensed in AZ. STC Certified. 4.9 stars on Google.

We handle design, installation, and cleanup from start to finish. No subcontractors on irrigation work. The crew that shows up is the crew that calibrates the system and walks you through the controller before they leave.

Call (623) 263-2652

5.0 Rated by 28 Google reviews

STC Certified Installer Industry certification specific to synthetic turf and irrigation integration
10+ years in the Phoenix Valley We know local soil conditions, HOA restrictions, and municipal water rules
4.9 stars across 27 Google reviews Verified by real customers including commercial and residential installs
Start-to-finish crew Same team does the dig, the install, and the cleanup. No subs, no handoffs.

Read 28 Google reviews

Irrigation Questions We Hear on Every Job

What types of irrigation systems work best in Arizona's desert climate?

Drip irrigation is the strongest performer for desert plantings because it delivers water directly to the root zone with minimal evaporation loss. For turf areas, low-angle rotary heads outperform fixed spray heads in high-heat conditions because they apply water more slowly, giving caliche soil time to absorb rather than pool. Smart controllers that adjust to local weather data are worth the upgrade on any system here.

How do I know if my irrigation system has a leak versus a failing head?

A failing head usually shows up as a wet circle at the head location or dry coverage beyond it. A subsurface leak shows up differently: soft ground in a spot that shouldn't be wet, a water bill spike with no corresponding change in schedule, or erosion under a hard surface like a paver walkway. We diagnose both on the same visit and don't charge separate trip fees to locate the problem.

Can an existing irrigation system be extended when I add artificial turf or pavers?

Yes, but it depends on what's already there. Artificial turf doesn't need irrigation, so adding turf often means capping or rerouting lines that used to cover that area. Paver patios change drainage patterns, which sometimes affects how adjacent zones perform. We always assess the existing system before any hardscape or turf install so the irrigation design matches the finished yard.

What is the difference between a drip zone and a flood irrigation setup?

Drip delivers water through low-pressure emitters directly at plant root zones, typically measured in gallons per hour rather than per minute. Flood irrigation delivers large water volumes across the surface at scheduled intervals, which is common on older agricultural parcels in the Phoenix Valley. Both can coexist on the same property, but they require separate pressure zones and different scheduling logic to avoid overwatering one area while starving another.

How long does a new residential irrigation system installation take?

A standard residential install for a front and back yard with four to six zones typically takes one to two days from trenching to calibration. Larger lots, properties with caliche that requires extra excavation, or jobs tied to a simultaneous landscape installation run longer. We'll give you a realistic timeline before we start so you know when the water is going back on.

Do I need a backflow preventer on my irrigation system in Arizona?

Yes. Arizona plumbing code requires an approved backflow preventer on all irrigation systems connected to potable water supply to prevent contamination of the water line. If your system was installed before this was consistently enforced, there's a reasonable chance it doesn't have one, or the one it has is no longer functional. We check backflow devices on every repair visit and can add one to any existing system.

Irrigation Service Across the Phoenix Valley

We design and repair irrigation systems throughout the metro. City-specific work includes Chandler, Gilbert, and Mesa as primary markets, with full coverage across surrounding communities.

20Communities served · tap to explore

Get Your Irrigation System Assessed

One call covers the diagnosis, the design, and the quote.

Call (623) 263-2652 Call for Your Free Quote